VHF/UHF Base / Repeater Radios

BLR9000 50W 32CH 19" Rack Mounted Repeater / Base Radio

The new BLR900 is a rack mount 50 Watts, (there is a 100 Watt internal option coming soon), 32 channel repeater. It can be used in Base or Repeater mode.

Six programmable function keys are located up front easy operation. With over 20 different functions available in programming, the function feys can assist with common functions custom designed to your needs.

There is an up front loudspeaker with volume for monitoring. Add the optional desk mic and have a fully function base station with 32 channels and scan.

The rear panel has inputs for backup power if your main DC power supply should fail. If the repeater does revert to backup DC supply, it can be programmed to send a CW alert over the air to let you know of the problem.

Main Features
- CTCSS / ENC and DEC
- DCS / ENC and DEC
- 2 Tone / DEC
- Compander built-in
- CW ID function
- CW message function
- DC Power save function
- TOT
- Key lock function
- Local PTT function
- Monitor
- Scan function
- Panel indicator ON and OFF selection
- Remote and Local can be selected by the front PF key
- Repeater and Base can be selected by the front PF key
- Reset function by the front panel PF key
- TX key is assigned to the front PF key
- TX power selectable (50 / 25 / 10 W)
- Encryption (FVP-25 required)
- High Level Rolling type encryption (FVP-35 required)
- Multi-tone function (max 16 tones)
- 19" Rack mounted, 2 RU
- Test tone function

Specifications
General Specifications
Frequency Ranges	BLR9000 (C): 148~174 MHz BLR9000 (D): 450~490 MHz
Number of Channels	32 Channels
Channel Spacing	5 / 6.25 kHz
Frequency Stability	1.5 ppm
Operating Voltage	13.6 V DC + 10 %
Current Drain	12 A Maximum
Duty Cycle	Receive: 100%, Transmit: 100% (@25 W output)
Operating Temperature	-30蚓~+60蚓
Dimensions (W x H x D)	483 (W) x 88 (H) x 343 (D) mm
Weight (approx.)	9.7 kg
Receiver Specifications
Antenna Impedance	50 W
Antenna connector	Type-BNC
Receiver Type	Double-Conversion Superheerodyne
Sensitivity	0.35 猩 (12dB SINAD)
Selectivity	83 dB (Wide), 75 dB (Narrow)
Intermodulation	82 dB (Wide), 78 dB (Narrow)
Image Rejection	90 dB
Squelch Threshold	0.3 uV
Audio Output	4 W @ 4 W
Audio Distortion	<3 %
Hum and Noise	>50 dB (Wide), >45 dB (Narrow)
Audio Frequency Response	De-emphasis: 6 dB/oct (From 300 Hz to 3 KHz)
Conducted Spurious	<-80 dBm
Transmitter Specifications
RF Output Power	50/25/10 W (High/Mid/Low)
Antenna Impedance	50 W
Antenna Connector	Type-N
Modulation Type	10K1F3E
System Deviation	�5.0 KHz (Wide), � 2.5 KHz (Narrow)
Hum and Noise	> 50 dB (Wide), > 45 dB (Narrow)
Microphone Sensitivity	5 mV
Audio Frequency Response	Pre-emphasis: 6 dB/oct (From 300 Hz to 3 KHz)
Spurious Emission	80 dB below carrier
Audio Distortion	2.5 % @ 1 KHz
Microphone Impedance	600 W
* Specifications are subject to change without notice or obligation

Accessories

0620100	MD-11A8J	Desktop Microphone for Base/Repeater Control
0620101	MH-25A8J	Standard Microphone
0620103	MH-64A8J	16 Key Pad Microphone for SmarTrunk & Sel Call use
0620619	FIF-9	In-line interface for 4 wire E & M
0611234	VPU-11VX/FVP-36	Encryption Unit - Voice Inversion
0611232	VPU-15VX/FVP-25	Encryption Unit - Voice Inversion Programmable Code
0611230	TVS2-VX/FVP-35	Encryption Unit - Rolling Code Programmable
0611240	KL3	Programming Kit for Encryption Unit
0611242	VPI-1VX	Programming Kit interface for VX boards, needs KL3
0651345	ST-865VT60F/VT60F	SmarTrunk 3G Unit for VX
0651350	ST-865VT60FS/VT60FS	SmarTrunk 3G Unit for VX with voice encryption
173106	-	Mobile Diplexer VHF 134-174 MHz 50W
173107	-	Mobile Diplexer UHF 400-430 MHz 50W
173108	-	Mobile Diplexer UHF 440-520 MHz 50W
093120	-	Benelec Rack 20Amp Power Supply with Battery management and alarm contacts, 13mm� terminal
0620621	VPL-1	Programming Kit (PC to Radio)

Brochure in format.

Print friendly version of this page