The 1738102 switch is manual double contact coaxial switch for switching high frequency signals on a line of 50 W.

Features This coaxial switch have been designed with special emphasis on high frequency characteristics for use as high frequency signals. They features: Wide frequency range. Low VSWR Negligible insertion loss. High Isolation between between terminals. The switches employ a coaxial contact mechanism with a self-cleaning function which means almost no deterioration of contact or change in characteristics. The unit is enclosed in a sturdy lead alloy case. It has a high withstand voltage and will not produce heat. The connector central line is made of the same phosphor bronze used in springs which means high contact reliability.

Accessories and Operation 

This unit goes temporarily into an open state during switching operations (switch timing open form). If the transmitter is switched in the transmission state, the load VSWR goes temporarily to unlimited and can permanently damage the transmitter as well as the contact points.

Always switch to the receiving state when carrying out switching operations.

Use only superior quality parts for the connecting cable and the connector and make sure they are properly connected.

Download this page in format