The Benelec 0202320 is an antenna designed and built for long life. 

Constructed with stainless steel radiation elements that guarantee high resistance to corrosion, mean that the 0202320 antenna will significantly outlast similar antennas.

Trees, buildings or other structures can be used to suspend the antenna, however it is worthwhile to keep in mind that it is best to avoid running the antenna over iron-roofed buildings. 

This reduces the effective height above ground, and, as with all HF antennas, the old rule "the higher the better" applies when wanting to extract maximum potential from your antenna.

The antenna, like the 0202410, can be mounted either horizontally between two supports, or as an inverted "vee" (one high central support and two lower end supports). 

There are two sets of mounting points: Where there is plenty of space, the insulators at the ends can be used to mount the antenna between two structures (please note the total length of the 0202320 is 48 metres). Where space is limited, there are other anchor points. 

If mounted this way the 0202320 will total 33 metres in length. 

Note: In this situation the support structures should be a minimum height of 10 metres.

Specifications

Frequency Range: 2 -30 MHz

Power Input: 100 Watts 250 Watts PEP
Impedance: 50 Ohms   

Installation Suggestions