The CSW-201G switch is manual, double contact coaxial switch for switching high frequency signals on a line of 50 W.

Features This coaxial switch have been designed with special emphasis on high frequency characteristics for use as high frequency signals. It features: Wide frequency range. Low SWR Negligible insertion loss. The connectors are gold plated to reduce the contact resistance. It has a high withstand voltage and will not produce heat.

Accessories and Operation 

This equipment includes two tapping screws (4x16) for attaching to the wall. Use these tapping screws to attach the equipment to wall.

This unit goes temporarily into an open state during switching operations (switch timing open form).

If the transmitter is switched in the transmission state the load SWR goes temporarily to unlimited and can permanently damage the transmitter as well as the contact points.

Always switch to the receiving state when carrying out switching operations.

This unit has e the opened side of the connector to the mechanism which becomes an short-circuiting state because of the performance improvement.

Use only superior quality parts for the connecting cable and the connector and make sure they are properly connected.