Advanced Low-Pass Filter. CF-50S can be use for 1.9 - 54MHz
 

 
 

 

 

 

 
 

Attenuation

How to Use (Examples)

  1. Matching of transceiver and antenna is to be well-balanced.

  2. Impedance of both in-put/out-put power is same polarization.

  3. Transceiver is to be grounded properly.

  4. CF-50S is indoor use only.

  5. TVI, BCI will happen at various occasions. If the Filter cannot prevent such interference sufficiently, another proper method for prevention is to be done at the same time.

Specifications
 Cut-off Frequency   57MHz
 Maximum Power   150W
 Impedance   50Ω
 Insertion Loss   Less than 0.4dB
 VSWR   Less than 1.2
 Attenuation   More than 60dB @ 75-250MHz
 Connector   M Type
 Dimensions   140 (W) x 56 (D) x 33 (H) mm

Print friendly version of this page Click to PRINT!